INT-2A + ECU-4A Power Harness

This harness is effectively a power adapter to convert your stock engine harness into a stand alone harness. All other stock wiring gets disconnected from the engine harness including the fuse boxes.

Requirements

• Starter hotwired*
• Fuel pump hotwired*
• Ignition hotwired (Power Harness)
• No Immo (Security)

* Pinout info for accessories can be found on the derby specs page.

Immo Identification

• 3 Coil - Center connector is for immo, must be missing factory
• 6 Coil - Wires for immo need to be missing in the 2nd from top (end with smaller connector) - see images

We can flash your computer to immo off or you can use a modded/tuned computer. A DIY work around would be to source a comptuer from the same model of car that is factory immo off.

Fitment

• 1998-2001 Lexus ES300*
• 1998-2001 Toyota Camry (v6)*
• 1999-2003 Toyota Sienna
• 1999-2003 Toyota Solara (v6)

* 1998 had two computer options, make sure your connector looks like the one on this page with 3 rows of pins.